As a business owner, you understand the importance of having a commercial refrigeration maintenance checklist. But do you know how to prolong the life of your equipment’s door gaskets?
Commercial refrigeration gaskets are flexible sealing strips installed around the perimeter of the unit’s doors. They help create a tight seal between the door and cabinet to limit warm, moist air from entering.
From checking temperatures to inspecting door gaskets, below is a commercial refrigeration maintenance guide as a starting point for routine care.
SHOP STOCK DOOR GASKETS CUSTOM ORDER DOOR GASKETS
What Should Be Included in a Commercial Refrigeration Maintenance Checklist? A 10-Step Guide
A commercial refrigeration maintenance checklist should include the following:
-
Temperature monitoring
-
Interior and exterior unit cleaning
-
Condenser coils
-
Airflow
-
Drains
-
Door gaskets
-
Hinges and closers
-
Frost or ice buildup
-
Routine professional service as needed
Note: Commercial refrigeration maintenance requirements and schedules vary by equipment manufacturer and model. Always follow your unit’s operation and maintenance manual along with applicable food safety requirements.
A practical starting schedule is:
| COMMERCIAL REFRIGERATION MAINTENANCE TASK | SUGGESTED SCHEDULE | WHY IT'S IMPORTANT |
| Check refrigerator and freezer temperatures | Daily | Helps confirm proper temperature control |
| Clean the unit interior | Weekly or per sanitation schedule | Maintains clean food storage conditions |
| Clean the unit exterior and keep airflow clear | During routine cleaning | Supports efficient system airflow |
| Inspect and clean the condenser coil | Per manufacturer schedule | Supports efficient heat transfer |
| Inspect door gaskets | During routine checks or per manufacturer schedule | Catches sealing problems early |
| Clean door gaskets | Regularly or when buildup appears | Helps maintain a tight door seal |
| Check hinges, closers, and alignment | During routine preventive maintenance | Helps doors close properly |
| Look for excess frost or condensation | During routine inspections | Can reveal sealing or system issues |
| Inspect drains and condensate management system | During routine preventive maintenance | Helps prevent leaks and standing water |
| Schedule preventive service when needed | Per manufacturer recommendations | Addresses issues requiring specialized service |
1. Check Refrigerator & Freezer Temperatures
Regularly confirm that your commercial refrigeration equipment is maintaining the set temperatures required for the products it stores. This is especially important for foodservice businesses that store time/temperature control for safety (TCS) foods.
According to the 2026 FDA Food Code, cold-held TCS food generally needs to be maintained at 41°F or below with specified exceptions.
If you see temperatures unexpectedly rising or fluctuating, don’t assume the refrigeration system itself is the only cause. Check if the doors are closing completely and inspect the gaskets for gaps, dirt, cracks, or other conditions that could interfere with the seal.
2. Clean the Unit Interior
Regularly cleaning your commercial refrigeration equipment helps remove spills, food residue, grease, and other buildup that can affect sanitation and unit condition.
Before you start cleaning, follow the manufacturer’s instructions for removing food and shutting down or disconnecting the equipment when required.
As instructed by the manufacturer, cleaning the inside of a commercial refrigeration unit typically involves:
-
Removing the shelves, pans, drawers, and other removable components
-
Cleaning approved surfaces with the recommended cleaning solution
-
Rinsing when required
-
Allowing all components to dry fully before reinstalling them
-
Not returning temperature-sensitive products until the equipment has returned to its required storage temperature
3. Clean the Unit Exterior
Once you finish cleaning inside your commercial refrigeration unit, move on to the outside.
Wipe down the exterior regularly to remove grease, dust, fingerprints, and food residue using cleaning products appropriate for the cabinet material.
Also check the area around the equipment. Refrigeration systems need proper airflow to release heat efficiently, so avoid blocking required ventilation openings or pushing equipment closer to walls than the manufacturer allows.
4. Inspect & Clean the Condenser Coil
A condenser coil is part of many air-cooled refrigeration systems that releases heat removed from inside the unit into the surrounding air. If it’s dirty, it can make it harder for the refrigeration system to transfer heat efficiently because dust, grease, lint, and other airborne debris can collect on the coil over time.
Inspect the condenser per your equipment manufacturer’s maintenance schedule and clean when required. The condenser isn’t always underneath or behind the unit, as its location and access method vary by equipment design.
Depending on your equipment model, condenser cleaning may require disconnecting the unit from power. More complex maintenance may also require a qualified technician.
5. Inspect the Door Gaskets

Door gasket inspection is a key step on your commercial refrigeration maintenance checklist because a compromised seal can impact both energy performance and temperature control.
Check the complete perimeter of each gasket for:
-
Cracks, tears, or splits
-
Hard or brittle areas
-
Warping or permanent deformation
-
Loose corners
-
Gaps between the gasket and cabinet
-
Food residue, grease, or other buildup
-
Sections that don’t compress or seal evenly
If you find the gasket is physically damaged or isn’t sealing evenly after cleaning, and the door hardware and alignment are functioning properly, it may need to be replaced.
6. Clean the Door Gaskets
Food residue, grease, crumbs, and grime can build up in gasket folds and along the sealing surface. Even if it’s not damaged, buildup can prevent the gasket from sitting evenly against the cabinet.
For many commercial refrigeration gaskets, manufacturer cleaning instructions typically involve a mild dish detergent and warm water, followed by rinsing and drying. You can also use a soft cloth or soft-bristled brush when appropriate to reach the gasket folds without damaging the material.
Avoid using a strong chemical cleaner unless it’s approved by the manufacturer’s cleaning instructions, as gasket materials can vary.
7. Check the Unit’s Door Hinges, Closers, & Alignment
A commercial refrigerator door not staying closed isn’t always caused by the gasket.
Inspect the following door hardware during routine maintenance:
-
Hinges
-
Self-closing mechanisms
-
Latches
-
Alignment
-
Other door hardware components
A damaged or misaligned door can even prevent a gasket in good condition from making consistent contact with the cabinet. Check these areas before replacing the gasket because a new one won’t resolve sealing problems if it’s caused by compromised door hardware.
8. Look for Excess Frost or Condensation

Excessive frost or condensation can be a warning sign that warm, moist air is entering the refrigerated compartment. If you see frost appearing on shelves or stored products, this may be caused by worn gaskets or door closers that aren’t functioning correctly.
Start by checking if the doors are closing properly and if the gasket has gaps, dirt, tears, or other damage.
If the gasket appears intact, the cause may involve other refrigeration components, such as:
-
Defrost components or controls
-
Evaporator coil or fan
-
Temperature controls or sensors
These areas may require inspection by a qualified refrigeration technician.
9. Inspect the Unit’s Drains & Condensate Management System
Commercial refrigeration equipment must manage the water created through condensation and defrosting. Condensation forms when moisture in the air collects on cold surfaces, while the defrost system melts frost and ice that build up on the refrigeration components.
If the water isn’t drained away or evaporated properly, water can pool, overflow, or leak around the unit. Standing moisture can also contribute to odors, sanitation issues, corrosion, and more ice buildup.
Depending on your model, the condensate management system may include:
-
Drain lines
-
Drain pans
-
Condensate evaporators
-
Other drainage or water management components
Not every commercial refrigeration unit has a removable drainage pan at the bottom, as condensate systems vary significantly by equipment design.
Look for standing water, blocked drains, unusual moisture, or overflow. And always follow the manufacturer’s instructions for cleaning accessible drain components.
10. Schedule Preventive Service When Needed
While commercial refrigeration maintenance can help find potential problems early, some areas should be addressed by a qualified service technician.
If you notice any of these conditions, having the equipment inspected by a professional is highly recommended:
-
Persistent temperature issues
-
Unusual noises
-
Unusually frequent cycling
-
Excessive frost
-
Leaks
-
Other abnormal signs
Professional preventive maintenance may include checking the unit’s:
-
Refrigeration-system performance
-
Electrical components
-
Fans and motors
-
Defrost controls
-
Refrigerant system
-
Temperature controls and sensors
-
Door hardware
-
Condenser and evaporator condition
You should also check the manufacturer’s equipment documentation for any recommended preventive maintenance or professional service schedules.
Commercial Door Gasket Maintenance Checklist: When Should You Replace a Gasket?

Cleaning the door gasket and sealing surface may fix some sealing problems. However, significant physical gasket damage typically requires replacement.
Some signs you may need to replace your gaskets are:
-
Tears
-
Cracks
-
Permanent warping
-
Brittleness
-
Missing sections
-
Persistent gasket gaps that prevent a tight seal
Replacing door gaskets requires finding compatible parts for your model.
Depending on the manufacturer and replacement part, a supplier may use the following identifying information:
-
Equipment model number
-
Serial number
-
OEM gasket part number
-
Gasket dimensions, profile, mounting design, and material
-
Other model comparability specifications
If the equipment’s identification information isn’t available, you may need to measure your gaskets per the supplier’s instructions.
Keep Your Commercial Refrigeration in Top Shape: Shop OEM-Equivalent Gaskets at Breakaway Enterprises
Help maintain proper sealing and refrigeration performance with timely gasket replacements.
At Breakaway Enterprises, we’re a distributor and manufacturer of OEM-equivalent gaskets compatible with leading commercial refrigeration manufacturers, including Anthony International, Beverage-Air, and Delfield.
Shop stock door gaskets, order custom gaskets, or contact us for help finding compatible replacement gaskets for your model today!
SHOP STOCK DOOR GASKETS CUSTOM ORDER DOOR GASKETS
Commercial Refrigeration Maintenance FAQs
There isn’t one universal commercial refrigeration maintenance schedule. Routine temperature, cleaning, door, and gasket checks should be done per the equipment manufacturer’s guidelines.
Clean your commercial refrigeration gaskets regularly and whenever food, grease, or debris builds up. Follow the equipment manufacturer’s recommendations for cleaning frequency and methods.
Common signs you may need to replace your commercial refrigeration gasket include:
- Cracks
- Tears
- Brittleness
- Permanent warping
- Loose sections
- Persistent gaps or uneven sealing after cleaning
