Ordering replacement gaskets for commercial refrigerator and freezer glass doors can get tricky. Some OEMs don’t sell replacement parts, requiring you to buy from OEM-equivalent gasket distributors. You also need to have specific information readily available to ensure you get the right gasket for your model, as third-party sellers will list this in their product listings. 

Here’s how to determine the gasket number you need from popular OEMs in this glass door freezer and refrigerator part number lookup guide.

 

Ardco (Swingline) Glass Door Refrigerator & Freezer Gaskets

Knowing the type of Ardco/Swingline glass door gaskets to buy begins with the product information specific to your model. Ardco gaskets come in three or four-sided shapes based on the model’s door size. 

When ordering replacement gaskets, you must know the B/M Number. This stands for the Brand/Model that acts as the OEM’s serial number to gather parts information. 

 

Where to Find Your Ardco/Swingline Door Size & B/M (Serial Number) Location

You can find your Ardco/Swingline’s B/M number on the door tag to reference when purchasing replacement gaskets. The door tag is located on the door itself, not the frame. 

If a tag isn’t available, you can measure the outside door dimensions (length, width, and height) and take a picture of the gasket to send to us. From there, we can provide the Ardco-equivalent gasket required for your model.

 

Anthony Glass Door Refrigerator & Freezer Gaskets

To know which Anthony glass door gasket you need, you must reference the following information:

• Door Size: Shows the length, width, and height of the door

• Model Number: Determines the gasket type needed for the door

• Work Order Number (WO#): Acts as the serial number for ordering replacement parts

Anthony gaskets come in three and four-sided shapes based on the door and model it applies to. 

 

Where to Find Your Anthony Door Size, Model, & Serial Number Location

You can find your Anthony door size, model number, and serial number location on the door ID tag. The tag can be found on top of each door frame. Depending on the size of your unit, a ladder or step stool may be needed. After locating the door ID tag, you can buy Anthony-equivalent replacement gaskets with these specs ready to reference. 

If you don’t see a door ID tag, measure the outside door dimensions (length, width, and height) and take a picture of the gasket. You can send this to us, and we’ll contact you with the OEM-equivalent gasket required for your Anthony model.

 

Hussman Glass Door Refrigerator & Freezer Gaskets

Before ordering replacement gaskets for Hussman glass door freezer or refrigerators, you must know the following information to ensure it applies to your model:

• Door dimensions

• Model number

• Serial number

Hussman doesn’t sell replacement gaskets, so you must purchase them from OEM-equivalent gasket distributors. They’ll list these details in their product descriptions, as each gasket has specific installation and size fit requirements for each Hussman model. 

Source: Hussman

 

Where to Find Your Hussman Door Size, Model, & Serial Number Location

To know the size of your Hussman freezer or refrigerator glass door, you’ll need to find its serial plate. Each Hussman appliance carries this label, which holds key information, including the door specs for ordering replacement parts, the appliance’s lifespan, safety instructions, and warranty status.

For most Hussman models, the serial plate location is on the upper left corner of the case inside the return air channel. You’ll likely need a flashlight to shine through the return air grille to find the serial plate. We recommend referring to your case Installation and Operation Manual for the exact location, as it may differ.

 

Example Shown: MODEL ID:  RL-3; SERIAL NO:  MY02M048950

 

After locating the serial plate, you’ll see the unit’s door dimensions, model number, and serial number to reference when ordering Hussman-equivalent replacement gaskets. 

Hussman OEM model numbers 0428562, 461957, 428563, and 461958 account for more than 90% of the gasket sales. 

You can also take a photo of your existing gasket while it’s mounted on your unit’s door and another of the gasket dart and send them to us. From there, we can determine the type of Hussman-equivalent gasket your model requires. 

 

STYLELINE (CRD) Glass Door Refrigerator & Freezer Gaskets

Formerly known as CRD, the brand name is now called STYLELINE, to help you understand the replacement gaskets you need. Whether you have a refrigerator or freezer glass door, you must know its door size, model number, and serial number. These details determine the type of gasket your STYLELINE model requires, as they come in three or four-sided shapes. 

 

Where to Find Your STYLELINE Door Size, Model, & Serial Number Location

You can find your STYLELINE door size, model number, and serial number location on the identification tag. The tag is on the top left corner of the frame, near the switch. However, certain STYLELINE model tags may be on the top of the door rail on the handle side, behind the magnetic gasket.

That way, you know the OEM-equivalent STYLELINE gaskets that apply to your model specifically to ensure you get the right replacement parts.